Acrylic based white base coat with good flexibility and good UV ink adhesion. Suitable for external white coating of sterilizable food cans. It is characterized by good opacity and stability properties

Alkyd based , general purpose over varnish with wet-on-wet properties. It gives excellent gloss on top off UV-curable inks. Good non yellowing, scratch and mobility properties.

Imperial® 2335 ARSR series of ink is a combination of vegetable oil and mineral oil based offset ink, specially recommended for Alkali resistance and soap resistance jobs. Selective pigments are used in this series.

Imperial® DEC 2930 inks are Alkyd based thermal drying offset inks suitable to print on white base coated tin plates for 3-piece cans, closures, screw caps & crowns in conjunction with an overprint varnish. It is recommended for food packaging jobs. Curing at 160°C for 12-15 minutes. It is characterized by unusually good colour retention and can be run wet trap with a suitable overprint varnish. SQTS Certificate available on request.

ImperialGLOSS 2355 Foil Series is a vegetable oil based offset ink drying by oxidation.Suitable for all types of litho work printed on impervious substrates.Single and multi-colour sheet fed litho presses.Impervious substrates such as foils and metallised substrates suitable for printing with offset inks

Imperial® 2315 FOODPACK inks are suitable for use on food packaging* where specific demand requires minimum odour developed during and after through drying.* When food pack inks are used, specially for food packaging always refer to our Declaration AO-2315.6 & AO-2315.7. SQTS certificate available on request

Imperial® GLOSS 2305 is a vegetable oil based offset ink specially formulated for single or multiple colour sheetfed litho presses equipped with or without infra-red heaters. It is characterized by good gloss, fast setting, moderate through drying and excellent rub resistance. Suitable for commercial, packaging and label work

Imperial® GLOSS 2345 is a vegetable oil based offset ink specially formulated for single or multiple colour sheetfed litho presses equipped with or without infra-red heaters. This series of offset inks is having High Viscosity.

Imperial 2375 is a combination of vegetable oil and mineral oilbased with good light fastness properties.Suitable for commercial packaging, labels, and poster jobs where light fastness properties are required.

Imperial® 4040 PERFECTION 8 inks are specially formulated for 8 colour perfection presses. It is characterized by good transfer with minimum ink build-up on impression cylinders when perfecting. It’s fast setting properties with good water balance helps in minimum loss of paper while starting up and requires very little spray powder due to good setting & through drying properties. It has good gloss and slip properties. Also suitable for 4 colour presses