Water-based flexographic inks especially designed for printing on single side PE-Coated boards meant for hot cups. Characteristic features are good printability and are fast drying with excellent wet and dry rub resistance and good water resistance.

Water reducible flexographic inks suitable for printing on Corona treated Extruded PE and PP films. These inks characteristically have excellent gloss, printability and smooth lay and give excellent adhesion making them ideal for printing shopping bags

Water reducible ruling inks especially designed for printing on forms, notebooks and other stationery. Characteristically these inks have high water resistance and so do not bleed in water.

Water-based ink especially suitable for PE-coated board / paper with excellent water and wet rub resistance Characteristically these inks have excellent printability, lay and gloss on the right substrate, are fast setting

Modified NC system for surface printing by Flexo or Gravure on treated clear/opacified co-extruded polypropylene films, treated LDPE film and on suitably primed Metallised films, PVC films and Aluminium foils. Characteristic features are High gloss with excellent adhesion at low web temperature and high mileage. Other features include high heat resistance with excellent jaw release, high flexibility and Deep Freeze resistance

Modified NC based inks specially designed for Flexographic surface printing on treated clear / opacified co-extruded polypropylene films, treated LDPE film and on suitably primed Metallized films, PVC films and Aluminum foils. Typically the Hiflex Surface 718 has high gloss and strength with excellent adhesion and flexibility. Other features include low solvent retention and high heat resistance with excellent jaw release.

Imperial® DEC 2930 inks are Alkyd based thermal drying offset inks suitable to print on white base coated tin plates for 3-piece cans, closures, screw caps & crowns in conjunction with an overprint varnish. It is recommended for food packaging jobs. Curing at 160°C for 12-15 minutes. It is characterized by unusually good colour retention and can be run wet trap with a suitable overprint varnish. SQTS Certificate available on request.

Imperial® 2315 FOODPACK inks are suitable for use on food packaging* where specific demand requires minimum odour developed during and after through drying.* When food pack inks are used, specially for food packaging always refer to our Declaration AO-2315.6 & AO-2315.7. SQTS certificate available on request

Imperial® GLOSS 2305 is a vegetable oil based offset ink specially formulated for single or multiple colour sheetfed litho presses equipped with or without infra-red heaters. It is characterized by good gloss, fast setting, moderate through drying and excellent rub resistance. Suitable for commercial, packaging and label work

Imperial 2375 is a combination of vegetable oil and mineral oilbased with good light fastness properties.Suitable for commercial packaging, labels, and poster jobs where light fastness properties are required.