Water reducible flexographic inks suitable for printing on Corona treated Extruded PE and PP films. These inks characteristically have excellent gloss, printability and smooth lay and give excellent adhesion making them ideal for printing shopping bags

Water reducible ruling inks especially designed for printing on forms, notebooks and other stationery. Characteristically these inks have high water resistance and so do not bleed in water.

Modified NC based inks specially designed for Flexographic surface printing on treated clear / opacified co-extruded polypropylene films, treated LDPE film and on suitably primed Metallized films, PVC films and Aluminum foils. Typically the Hiflex Surface 718 has high gloss and strength with excellent adhesion and flexibility. Other features include low solvent retention and high heat resistance with excellent jaw release.

Imperial® DEC 2930 inks are Alkyd based thermal drying offset inks suitable to print on white base coated tin plates for 3-piece cans, closures, screw caps & crowns in conjunction with an overprint varnish. It is recommended for food packaging jobs. Curing at 160°C for 12-15 minutes. It is characterized by unusually good colour retention and can be run wet trap with a suitable overprint varnish. SQTS Certificate available on request.

Ultra Violet Curing Metal Dec Offset inks designed for 3-piece beverage containers, closures, cigar boxes, crowns in conjunction with an over lacquer. Can be used on single or multi-color presses for metal decorating. Also suitable for alcohol dampening. After proper curing the inks form a flexible ink film with low odor

Ultra Violet Curing Metal Dec offset ink. This is formulated without ITX and Benzophenone.Sheetfed metal decorating inks used for printing food packaging three-piece beverage containers, closures screw caps, food cans and crowns in conjunction with an over lacquer

Modified Polyamide system for Flexographic surface printing on treated LD / HDPE/ PP/ HM HDPE films. Characteristic properties include High Gloss, excellent adhesion and flexibility with good scuff resistance. A sub series called POLYSTAR WP is available for Woven polypropylene sacks with the same characteristic properties

Modified Polyamide system for Flexographic surface printing on Poly woven sacks. Characteristic properties include High Gloss, excellent adhesion and flexibility with good scuff resistance.