Polyester based white base coat with high flexibility. Recommended for general purpose cans, twist off closures, lug cap and crown caps with good coverage properties.

Polyester based Matt over varnish with excellent flexibility, adhesion to plain and base coated substrate, non-yellowing ,good scratch and mobility properties.Suitable for External varnishing of three piece cans, twist off closures,crown caps and PP caps.

Polyester based size / primer for excellent UV ink adhesion. Suitable for deep drawn cans and twist off closures. Correctly cured film stands sterilization at 121 deg cent for 90 min in steam.

Aluminised Silver Lacquer is a epoxy based internal lacquer with good chemical resistance and flexibility. Specially recommended for jobs where sulphur masking is required.

Epoxy based external clear lacquer with good flexibility & good adhesion to direct tin plate. Suitable for general line cans and lids

Epoxy based External Gold Lacquer for General Line Cans and lids. This is not to be used for internal coating. It is characterized by good sterilization properties at 121 degrees Celsius for 90 minutes in steam. Slip is excellent with improved mobility properties.

Epoxy based Internal Gold Lacquer with good chemical resistance, excellent flexibility, good adhesion to plain substrate and deep drawn properties. Stands sterilization at 121 degrees Celsius for 90 min in steam. For optimum results this Lacquer can be applied with two coats. SQTS certification available on request

Epoxy based One layer release buff lacquer with excellent chemical, scratch and handling resistance,suitable for internal release lacquer for 3-piece cans and technical cans.Correctly cured film stands sterilization at 121 deg c for 90 min.

Epoxy based Internal White with good chemical resistance. Suitable for internal coating for 3 piece cans and ends. Can be applied as two coats to get optimum results. Correctly cured film stands sterilization at 121 degrees Celsius for 90 min in steam. SQTS certification available on request.