Wax free aqueous acrylic emulsion primer for gravure or flexo applications on metallised films and foils. At the right dry film weight the primer imparts excellent adherence and printability for NC based inks on the metallised films and foils.

Water reducible ruling inks especially designed for printing on forms, notebooks and other stationery. Characteristically these inks have high water resistance and so do not bleed in water.

Modified NC system for surface printing by Flexo or Gravure on treated clear/opacified co-extruded polypropylene films, treated LDPE film and on suitably primed Metallised films, PVC films and Aluminium foils. Characteristic features are High gloss with excellent adhesion at low web temperature and high mileage. Other features include high heat resistance with excellent jaw release, high flexibility and Deep Freeze resistance

Imperial® DEC 2930 inks are Alkyd based thermal drying offset inks suitable to print on white base coated tin plates for 3-piece cans, closures, screw caps & crowns in conjunction with an overprint varnish. It is recommended for food packaging jobs. Curing at 160°C for 12-15 minutes. It is characterized by unusually good colour retention and can be run wet trap with a suitable overprint varnish. SQTS Certificate available on request.

Ultra Violet Curing Metal Dec Offset inks designed for 3-piece beverage containers, closures, cigar boxes, crowns in conjunction with an over lacquer. Can be used on single or multi-color presses for metal decorating. Also suitable for alcohol dampening. After proper curing the inks form a flexible ink film with low odor

Polyester based on-yellowing over varnish with good gloss, flexibility, wet-on-wet properties. Suitable for external varnishing of 3-piece cans, twist off closures and crown caps. It has good sterilization properties at 121 degrees Celsius for 90 min in steam.

Polyester based white base coat with high flexibility. Recommended for general purpose cans, twist off closures, lug cap and crown caps with good coverage properties.

Epoxy based Internal Gold Lacquer with good chemical resistance, excellent flexibility, good adhesion to plain substrate and deep drawn properties. Stands sterilization at 121 degrees Celsius for 90 min in steam. For optimum results this Lacquer can be applied with two coats. SQTS certification available on request

Modified Polyamide system for Flexographic surface printing on Poly woven sacks. Characteristic properties include High Gloss, excellent adhesion and flexibility with good scuff resistance.

Modified Polyamide system suitable to print on PVC films for Twist Wrappers. The key features are low residual odour with excellent flexibility and scuff resistance. Good water and deep freeze resistance and High gloss are other main features