Mini Cart

Now Shopping by
Ink System: Solvent Base
Ink System: Water Base
Ink System: UV INKS
Ink System: Offset
Ink System: Metal Dec Coatings
Ink System: Metal Dec Inks
Ink System: Varnishes
Marketwise: Three Piece Food Cans
Process Wise: Metal Coating
List Grid

9 Items

Set Descending Direction
  1. Metaflex 2060 Varnish
    Polyester based on-yellowing over varnish with good gloss, flexibility, wet-on-wet properties. Suitable for external varnishing of 3-piece cans, twist off closures and crown caps. It has good sterilization properties at 121 degrees Celsius for 90 min in steam.
  2. Metaflex 2570 White Coat
    Polyester based white base coat with high flexibility. Recommended for general purpose cans, twist off closures, lug cap and crown caps with good coverage properties.
  3. Metaflex Matt Over Print Varnish 0316
    Polyester based Matt over varnish with excellent flexibility, adhesion to plain and base coated substrate, non-yellowing ,good scratch and mobility properties.Suitable for External varnishing of three piece cans, twist off closures,crown caps and PP caps.
  4. Metaflex Size Primer 2145
    Polyester based size / primer for excellent UV ink adhesion. Suitable for deep drawn cans and twist off closures. Correctly cured film stands sterilization at 121 deg cent for 90 min in steam.
  5. Metalak Aluminized Silver Lacquer 8003
    Aluminised Silver Lacquer is a epoxy based internal lacquer with good chemical resistance and flexibility. Specially recommended for jobs where sulphur masking is required.
  6. Metalak Clear Lacquer 1000
    Epoxy based external clear lacquer with good flexibility & good adhesion to direct tin plate. Suitable for general line cans and lids
  7. Metalak Ext Gold Lacquer 0481
    Epoxy based External Gold Lacquer for General Line Cans and lids. This is not to be used for internal coating. It is characterized by good sterilization properties at 121 degrees Celsius for 90 minutes in steam. Slip is excellent with improved mobility properties.
  8. Metalak Int.Gold Lacquer 0460
    Epoxy based Internal Gold Lacquer with good chemical resistance, excellent flexibility, good adhesion to plain substrate and deep drawn properties. Stands sterilization at 121 degrees Celsius for 90 min in steam. For optimum results this Lacquer can be applied with two coats. SQTS certification available on request
  9. Metalak Internal Lt. Buff 4010
    Epoxy based One layer release buff lacquer with excellent chemical, scratch and handling resistance,suitable for internal release lacquer for 3-piece cans and technical cans.Correctly cured film stands sterilization at 121 deg c for 90 min.
List Grid

9 Items

Set Descending Direction