Specially formulated mixed resin lacquer for cold seal packaging with excellent release properties. The lacquer characteristically has very low odor and excellent printability. Suitable for Flexo and Rotogravure applications.

Water-based ink with excellent fat/oil resistance especially formulated for food wrap glassine papers where the print does not come in direct contact with the food. The fat penetrating through the paper does not cause any bleeding in the ink.

Wax free aqueous acrylic emulsion primer for gravure or flexo applications on metallised films and foils. At the right dry film weight the primer imparts excellent adherence and printability for NC based inks on the metallised films and foils.

Modified NC system for surface printing by Flexo or Gravure on treated clear/opacified co-extruded polypropylene films, treated LDPE film and on suitably primed Metallised films, PVC films and Aluminium foils. Characteristic features are High gloss with excellent adhesion at low web temperature and high mileage. Other features include high heat resistance with excellent jaw release, high flexibility and Deep Freeze resistance

Modified NC based inks for Flexo or Gravure reverse application on treated BOPP and subsequent lamination to co-extruded polypropylene films, metallized co-extruded polypropylene films or polyethylene films using wide range of laminating adhesives. Characteristic features include excellent adhesion with high bond strength, excellent flexibility, low solvent retention and high heat resistance with excellent jaw release

Modified NC system for Flexographic printing on envelopes & paper. Apart from High gloss and strength Hiflex Paper 7050 inks have good scuff resistance and excellent flexibility

Press- ready modified pigmented NC system (without catalyst)for Gravure reverse application on treated BOPP and subsequent lamination to co-extruded polypropylene films, metallized co-extruded polypropylene films or polyethylene films using wide range of laminating adhesives. 4-5% adhesion promoter to be added at the time of printing. Especially formulated for gravure lamination giving high bond strength and high heat seal strength with very low solvent retention.

Imperial® DEC 2930 inks are Alkyd based thermal drying offset inks suitable to print on white base coated tin plates for 3-piece cans, closures, screw caps & crowns in conjunction with an overprint varnish. It is recommended for food packaging jobs. Curing at 160°C for 12-15 minutes. It is characterized by unusually good colour retention and can be run wet trap with a suitable overprint varnish. SQTS Certificate available on request.

Imperial® 2315 FOODPACK inks are suitable for use on food packaging* where specific demand requires minimum odour developed during and after through drying.* When food pack inks are used, specially for food packaging always refer to our Declaration AO-2315.6 & AO-2315.7. SQTS certificate available on request

U.V curable low odour varrnish with high resistance properties and with improved cure speed.To improve the gloss and rub resistance of labels and other printed matter. This Varnish is formulated without ITX and Benzophenone for indirect food packaging applications.