Specially formulated mixed resin lacquer for cold seal packaging with excellent release properties. The lacquer characteristically has very low odor and excellent printability. Suitable for Flexo and Rotogravure applications.

Aqueous Acrylic Pearlescent based lacquer for In-line and off-line roller coat application on Coated paper and paper board. Characteristic features are brilliant pearl finish with high gloss, slip, rub and water resistance.

Aqueous Acrylic Pearlescent based lacquer for In-line and off-line roller coat application on Coated paper and paper board. Characteristic features are good pearl finish with high gloss, slip, rub and water resistance.

Dye based Modified NC laquers for Flexo or Gravure application on aluminised paper or board as well as for labels.

Modified NC based inks for Flexo or Gravure reverse application on treated BOPP and subsequent lamination to co-extruded polypropylene films, metallized co-extruded polypropylene films or polyethylene films using wide range of laminating adhesives. Characteristic features include excellent adhesion with high bond strength, excellent flexibility, low solvent retention and high heat resistance with excellent jaw release

Modified NC based Flexo inks for cartons and boards. Characteristic features are High gloss and strength with excellent flexibility. Excellent scuff resistance and low solvent retention are other key features.

Dye based lacquers suitable for Rotogravure application on metallised/ silvercoated boards to achieve various golden shades. Custom matches can be done. Can be supplied in conjuction with Hiflex Board Silver ink for plain boards.

Press- ready modified pigmented NC system (without catalyst)for Gravure reverse application on treated BOPP and subsequent lamination to co-extruded polypropylene films, metallized co-extruded polypropylene films or polyethylene films using wide range of laminating adhesives. 4-5% adhesion promoter to be added at the time of printing. Especially formulated for gravure lamination giving high bond strength and high heat seal strength with very low solvent retention.

Imperial® DEC 2930 inks are Alkyd based thermal drying offset inks suitable to print on white base coated tin plates for 3-piece cans, closures, screw caps & crowns in conjunction with an overprint varnish. It is recommended for food packaging jobs. Curing at 160°C for 12-15 minutes. It is characterized by unusually good colour retention and can be run wet trap with a suitable overprint varnish. SQTS Certificate available on request.

Imperial® 2315 FOODPACK inks are suitable for use on food packaging* where specific demand requires minimum odour developed during and after through drying.* When food pack inks are used, specially for food packaging always refer to our Declaration AO-2315.6 & AO-2315.7. SQTS certificate available on request