Specially formulated mixed resin lacquer for cold seal packaging with excellent release properties. The lacquer characteristically has very low odor and excellent printability. Suitable for Flexo and Rotogravure applications.

Modified NC based inks for Flexo or Gravure reverse application on treated BOPP and subsequent lamination to co-extruded polypropylene films, metallized co-extruded polypropylene films or polyethylene films using wide range of laminating adhesives. Characteristic features include excellent adhesion with high bond strength, excellent flexibility, low solvent retention and high heat resistance with excellent jaw release

Press- ready modified pigmented NC system (without catalyst)for Gravure reverse application on treated BOPP and subsequent lamination to co-extruded polypropylene films, metallized co-extruded polypropylene films or polyethylene films using wide range of laminating adhesives. 4-5% adhesion promoter to be added at the time of printing. Especially formulated for gravure lamination giving high bond strength and high heat seal strength with very low solvent retention.

Imperial® DEC 2930 inks are Alkyd based thermal drying offset inks suitable to print on white base coated tin plates for 3-piece cans, closures, screw caps & crowns in conjunction with an overprint varnish. It is recommended for food packaging jobs. Curing at 160°C for 12-15 minutes. It is characterized by unusually good colour retention and can be run wet trap with a suitable overprint varnish. SQTS Certificate available on request.

Ultra Violet Curing Metal Dec Offset inks designed for 3-piece beverage containers, closures, cigar boxes, crowns in conjunction with an over lacquer. Can be used on single or multi-color presses for metal decorating. Also suitable for alcohol dampening. After proper curing the inks form a flexible ink film with low odor

Modified NC based inks for Flexo or Gravure reverse application on treated BOPP and subsequent lamination to co-extruded polypropylene films, metallised co-extruded polypropylene films or polyethylene films using wide range of laminating adhesives. Available as catalyst free or catalyst based. Especially formulated to give high bond strength and heat seal strength and has very low solvent retention

Polyester based on-yellowing over varnish with good gloss, flexibility, wet-on-wet properties. Suitable for external varnishing of 3-piece cans, twist off closures and crown caps. It has good sterilization properties at 121 degrees Celsius for 90 min in steam.

Polyester based white base coat with high flexibility. Recommended for general purpose cans, twist off closures, lug cap and crown caps with good coverage properties.

Epoxy based Internal Gold Lacquer with good chemical resistance, excellent flexibility, good adhesion to plain substrate and deep drawn properties. Stands sterilization at 121 degrees Celsius for 90 min in steam. For optimum results this Lacquer can be applied with two coats. SQTS certification available on request

Modified NC based inks for Gravure reverse application on treated BOPP and subsequent lamination to co-extruded polypropylene films, metallized co-extruded polypropylene films or polyethylene films using wide range of laminating adhesives. 4-5% adhesion promoter to be added at the time of printing. Especially formulated for gravure lamination giving high bond strength and high heat seal strength with very low solvent retention.