Imperial® DEC 2930 inks are Alkyd based thermal drying offset inks suitable to print on white base coated tin plates for 3-piece cans, closures, screw caps & crowns in conjunction with an overprint varnish. It is recommended for food packaging jobs. Curing at 160°C for 12-15 minutes. It is characterized by unusually good colour retention and can be run wet trap with a suitable overprint varnish. SQTS Certificate available on request.

Imperial® 270 LOW TACK INKS are specially developed for uncoated papers and boards with poor surface strength. It is characterized by extra low tack with good press stability and minimum dot gain. Suitable for single and multi colour sheetfed litho press equipped with or without infra-red heaters

Ultra Violet Curing Metal Dec Offset inks designed for 3-piece beverage containers, closures, cigar boxes, crowns in conjunction with an over lacquer. Can be used on single or multi-color presses for metal decorating. Also suitable for alcohol dampening. After proper curing the inks form a flexible ink film with low odor

Polyester based on-yellowing over varnish with good gloss, flexibility, wet-on-wet properties. Suitable for external varnishing of 3-piece cans, twist off closures and crown caps. It has good sterilization properties at 121 degrees Celsius for 90 min in steam.

Polyester based white base coat with high flexibility. Recommended for general purpose cans, twist off closures, lug cap and crown caps with good coverage properties.

Epoxy based Internal Gold Lacquer with good chemical resistance, excellent flexibility, good adhesion to plain substrate and deep drawn properties. Stands sterilization at 121 degrees Celsius for 90 min in steam. For optimum results this Lacquer can be applied with two coats. SQTS certification available on request