Specially formulated mixed resin lacquer for cold seal packaging with excellent release properties. The lacquer characteristically has very low odor and excellent printability. Suitable for Flexo and Rotogravure applications.

Water-based flexographic inks especially designed for printing on single side PE-Coated boards meant for hot cups. Characteristic features are good printability and are fast drying with excellent wet and dry rub resistance and good water resistance.

Water-based ink especially suitable for PE-coated board / paper with excellent water and wet rub resistance Characteristically these inks have excellent printability, lay and gloss on the right substrate, are fast setting

Modified NC system for surface printing by Flexo or Gravure on treated clear/opacified co-extruded polypropylene films, treated LDPE film and on suitably primed Metallised films, PVC films and Aluminium foils. Characteristic features are High gloss with excellent adhesion at low web temperature and high mileage. Other features include high heat resistance with excellent jaw release, high flexibility and Deep Freeze resistance

Modified NC based inks for Flexo or Gravure reverse application on treated BOPP and subsequent lamination to co-extruded polypropylene films, metallized co-extruded polypropylene films or polyethylene films using wide range of laminating adhesives. Characteristic features include excellent adhesion with high bond strength, excellent flexibility, low solvent retention and high heat resistance with excellent jaw release

Press- ready modified pigmented NC system (without catalyst)for Gravure reverse application on treated BOPP and subsequent lamination to co-extruded polypropylene films, metallized co-extruded polypropylene films or polyethylene films using wide range of laminating adhesives. 4-5% adhesion promoter to be added at the time of printing. Especially formulated for gravure lamination giving high bond strength and high heat seal strength with very low solvent retention.

Modified NC based inks for Flexo or Gravure reverse application on treated BOPP and subsequent lamination to co-extruded polypropylene films, metallised co-extruded polypropylene films or polyethylene films using wide range of laminating adhesives. Available as catalyst free or catalyst based. Especially formulated to give high bond strength and heat seal strength and has very low solvent retention

Modified NC based inks for Gravure reverse application on treated BOPP and subsequent lamination to co-extruded polypropylene films, metallized co-extruded polypropylene films or polyethylene films using wide range of laminating adhesives. 4-5% adhesion promoter to be added at the time of printing. Especially formulated for gravure lamination giving high bond strength and high heat seal strength with very low solvent retention.

Aqueous Acrylic Gloss coating for In-line or off-line roller coating applications on PE-coated boards. Specially formulated as a protective layer for inks on PE-coated boards and hence has excellent rub and water resistance. The gloss and slip are also good.