Water-based flexographic inks especially designed for printing on single side PE-Coated boards meant for hot cups. Characteristic features are good printability and are fast drying with excellent wet and dry rub resistance and good water resistance.

Water-based ink especially suitable for PE-coated board / paper with excellent water and wet rub resistance Characteristically these inks have excellent printability, lay and gloss on the right substrate, are fast setting

Modified NC system for surface printing by Flexo or Gravure on treated clear/opacified co-extruded polypropylene films, treated LDPE film and on suitably primed Metallised films, PVC films and Aluminium foils. Characteristic features are High gloss with excellent adhesion at low web temperature and high mileage. Other features include high heat resistance with excellent jaw release, high flexibility and Deep Freeze resistance

Imperial® DEC 2930 inks are Alkyd based thermal drying offset inks suitable to print on white base coated tin plates for 3-piece cans, closures, screw caps & crowns in conjunction with an overprint varnish. It is recommended for food packaging jobs. Curing at 160°C for 12-15 minutes. It is characterized by unusually good colour retention and can be run wet trap with a suitable overprint varnish. SQTS Certificate available on request.

Ultra Violet Curing Metal Dec Offset inks designed for 3-piece beverage containers, closures, cigar boxes, crowns in conjunction with an over lacquer. Can be used on single or multi-color presses for metal decorating. Also suitable for alcohol dampening. After proper curing the inks form a flexible ink film with low odor

Polyester based on-yellowing over varnish with good gloss, flexibility, wet-on-wet properties. Suitable for external varnishing of 3-piece cans, twist off closures and crown caps. It has good sterilization properties at 121 degrees Celsius for 90 min in steam.

Polyester based white base coat with high flexibility. Recommended for general purpose cans, twist off closures, lug cap and crown caps with good coverage properties.

Polyester based Gold Varnish with good gloss, flexibility, wet-on-wet properties. This is toned version of Metaflex 2060. Different gold shades can be achieved as per customer’s requirement

Epoxy based Internal Gold Lacquer with good chemical resistance, excellent flexibility, good adhesion to plain substrate and deep drawn properties. Stands sterilization at 121 degrees Celsius for 90 min in steam. For optimum results this Lacquer can be applied with two coats. SQTS certification available on request

Aqueous Acrylic Gloss coating for In-line or off-line roller coating applications on PE-coated boards. Specially formulated as a protective layer for inks on PE-coated boards and hence has excellent rub and water resistance. The gloss and slip are also good.