Products

Imperial® GLOSS 2305

Imperial® GLOSS 2305 is a vegetable oil based offset ink specially formulated for single or multiple colour sheetfed litho presses equipped with or without infra red...

Imperial® 2310 HSFS

Imperial® 2310 HSFS is a vegetable oil based & high structured offset ink specially formulated for commercial jobs like magazines & flyers. Suitable for alco...

Imperial® 4040 PERFECTION 8

Imperial® 4040 PERFECTION 8 inks are specially formulated for 8 colour perfection presses. It is characterized by good transfer with minimum ink build-up on impressi...

Imperial® 270 LOW TACK

Imperial® 270 LOW TACK INKS are specially developed for uncoated papers and boards with poor surface strength. It is characterized by extra low tack with good p...

Imperial® 2315 FOODPACK

Imperial® 2315 FOODPACK inks are suitable for use on food packaging* where specific demand requires minimum odour developed during and after through drying.** When F...

Imperial® HS 2320

Imperial® HS 2320 inks are specially developed for printing on extremely absorbent surfaces with poor fiber cohesion. The inks are mainly suitable for uncoated carto...

ImperialLASER® 2215

ImperialLASER® 2215 inks are specially formulated for high speed continuous stationery presses and are suitable for Coldset presses. It is structured ink with good f...

Imperial® GLOSS Oil based Varnishes

Following oil based overprint varnishes are specially formulated for single & multi colour litho presses for overprint varnishing of printed works. Can be run wet-on-...

Imperial® QUICK WASH 9050 99428

Imperial®Quick Wash is excellent cleaning solution for removing oil base inks. It removes ink from rollers, blankets and other surfaces and, as it is emulsifiable, m...

MIXED DRIER 205 M1944

Combination of driers used to accelerate the drying of conventional offset inks. Recommended dosage is 0.5 to 1%. Care has to be taken as excessive dosages will deteriora...

Imperial® UV 4403 SHEETFED OFFSET INKS

Ultra Violet Curing Sheetfed Offset inks suitable for commercial printed matter, labels and folding cartons. Can be used on Sheetfed Offset, Web Offset, Rotary Letterpre...

Imperial® UV 4404 LETTERPRESS INKS

Ultra Violet Curing Letterpress inks for high quality label printing. Can be used on single or multi colour rotary letterpress. Very good gloss and excellent rub resistan...

Imperial® UV 4475 FLEXO NARROW WEB INKS

Ultra Violet Curing Flexographic inks for label printing with good adhesion to a wide range of non absorbent substrates such as PS, Polypropylene and PET. Substrates sho...

Imperial® UV HD 4477 FLEXO NARROW WEB INKS

Ultra Violet Curing Flexographic inks for label printing with good adhesion to a wide range of non absorbent substrates such as PS, polypropylene and PET. Substrates sho...

Imperial® UV 4410 DRY OFFSET INKS

Ultra Violet Curing Dry Offset inks specially designed for non-porous substrates. Excellent rub-resistance with good press stability and minimum dot gain. It is charact...

Imperial® UV 4402 METALDEC INKS

Ultra Violet Curing Metaldec Offset inks designed for 3-piece beverage containers, closures, cigar boxes, crowns in conjunction with an overlacquer. Can be used on single...

Imperial® UV 4455 METALDEC INKS

Ultra Violet Curing Metaldec Offset inks designed for 3-piece beverage containers, closures, cigar boxes, crowns in conjunction with an overlacquer. Can be used on singl...

Imperial® UV 4460 SCREEN INKS

Ultra Violet Curing Silk screen inks primarily designed for PVC substrates along with paper and board with excellent adhesion and fast cure rate. Recommended of screen ...

Imperial® UV WASH 30025

Imperial® UV Wash is a mixture of aromatic and aliphatic solvents. Excellent cleaning solution for removing UV inks and traces from Anilox Rollers and EDPM Rubber Ro...

IMPERIAL® DEC 2930 INKS

Imperial® DEC 2930 inks are Alkyd based thermal drying offset inks suitable to print on white base coated tin plates for 3-piece cans, closures, screw caps & cr...

METTUBE INKS

METTUBE Inks are thermally cured non varnishable inks for Collapsible tubes with good gloss and printability. Good curing speed. Very good press stability and excellent c...

METALAK 0460 INTERNAL GOLD LACQUER

METALAK 0460 INTERNAL GOLD LACQUER is epoxy based Internal Gold Lacquer with good chemical resistance, excellent flexibility, good adhesion to plain substrate and deep dr...

METALAK 1737 INTERIOR WHITE

METALAK 1737 INTERIOR WHITE is epoxy based Internal White with good chemical resistance. Suitable for internal coating for 3 piece cans and ends. Can be applied as two co...

METALAK 4000 INTERIOR DARK BEIGE

METALAK 4000 INTERIOR DARK BEIGE is epoxy based Buff / Dark Beige Internal Lacquer for packing aggressive water based paints & inks. Suitable for internal protective ...

METALAK 0470 INTERNAL TUBE GOLD LACQUER

METALAK 0470 INTERNAL TUBE GOLD LACQUER is epoxy based Internal Tube Gold Coating with good chemical resistance. Good flexibility, adhesion to plain collapsible tubes wit...

METALAK 8002 ALUMINISED GOLD LACQUER

METALAK ALUMINISED GOLD LACQUER is a epoxy based internal lacquer with good chemical resistance and flexibility. Specially recommended for jobs where sulphur masking is ...

METALAK 1030 0020 SIZE PRIMER

METALAK 1030 0020 SIZE PRIMER is epoxy based size / primer with good flexibility and adhesion. Suitable for cans and lids of 3 piece cans. Good adhesion of conventional ...

METAFLEX 2145 SIZE PRIMER

METAFLEX 2145 SIZE PRIMER is polyester based size / primer for excellent UV ink adhesion. Suitable for deep drawn cans and twist off closures. Correctly cured film stand...

METAFLEX 2535 WHITE BASE COAT

METAFLEX 2535 WHITE BASE COAT is polyester based untonned white base coat with high flexibility, good gloss hardness & retort able properties. suitable for subsequent...

METAFLEX 2538 TONNED WHITE BASE COAT

METAFLEX 2538 WHITE BASE COAT is toned version of METAFLEX WHITE BASE COAT 2535. Toning can be customized as per requirement. Suitable for conventional inks and UV inks.

METAFLEX 2555 WHITE BASE COAT

METAFLEX 2555 WHITE BASE COAT is polyester based toned white base coat with excellent flexibility, gloss and hardness. Suitable for external coating for sterilized food ...

METAFLEX 2570 WHITE BASE COAT

METAFLEX 2570 WHITE BASE COAT is polyester based white base coat with high flexibility. Recommended for general purpose cans, twist off closures, lug cap and crown caps w...

METAFLEX 2580 SIZELESS WHITE BASE COAT

METAFLEX 2580 SIZELESS WHITE BASE COAT is sizeless Polyester based white base coat with very good flexibility. Recommended for lug caps, twist off closures & crown c...

DECOLAC 2575 WHITE BASE COAT TINTED

DECOLAC 2575 WHITE BASE COAT TINTED is polyester based white base coat for General Line cans with flexibility & gloss. Recommend for non sterilizable cans and pails. ...

METAFLEX 2510 NON VARNISH WHITE BASE COAT

METAFLEX 2510 NON VARNISH WHITE BASE COAT is Non-Varnish white base coat with good flexibility and hardness. Specially suitable for external coating of lids and pails. ...

DECOLKYD 2550 WHITE BASE COAT

DECOLKYD 2550 WHITE BASE COAT is Alkyd based white coating for General Line Containers. Suitable for external coating of general line cans with conjunction with a primer.

METAFLEX 2565 TUBE WHITE BASE COAT

METAFLEX 2565 TUBE WHITE BASE COAT is Polyester Tube white base coat with good flexibility and gloss. Suitable for external coating for collapsible tubes. It has high vi...

METAFLEX 2560 COLOURED COATINGS

METAFLEX 2560 COLOURED COATINGS is polyester based coating with good flexibility and gloss. Suitable for external coating for general line cans, twist off closures and ...

DECOFLEX 1510 WHITE BASE COAT

DECOFLEX 1510 WHITE BASE COAT is a Acrylic based White base coat with good flexibility and good UV ink adhesion. Suitable for external white coating of sterizable food ca...

METAFLEX 2060 OVERPRINT VARNISH 2060 0002

METAFLEX 2060 OVERPRINT VARNISH is polyester based on-yellowing over varnish with good gloss, flexibility, wet-on-wet properties. Suitable for external varnishing of 3-pi...

METAFLEX OVERPRINT GOLD VARNISH 2060 0040

METAFLEX OVERPRINT GOLD VARNISH 2060 0040 is polyester based Gold Varnish with good gloss, flexibility, wet-on-wet properties. This is toned version of Metaflex 2060. Dif...

METAFLEX 2060 MATT OVER PRINT VARNISH 2060 0316

METAFLEX 2060 MATT OVER PRINT VARNISH is a polyester based varnish with excellent flexibility and good scratch properties. Suitable for external varnishing of 3 piece can...

METAFLEX 2165 SILVER REPAIR COAT 2165 9201

METAFLEX SILVER REPAIR COAT 2165 9201 is a polyester based silver lacquer with excellent flexibility and Good adhesion on plain substrate. Suitable for external coating o...

DECOLAC 2030 OVER VARNISH:

DECOLAC OVER VARNISH 2030 is alkyd based over varnish for General Line Cans with good gloss, wet-on-wet properties. It is characterized by high solids and good coverage ...

DECOLAC 2040 LOW BAKE VARNISH

DECOLAC 2040 LOW BAKE OVER VARNISH is alkyd based over varnish for general line cans and three piece cans with good gloss and wet on wet properties. It is characterized b...

DECOLAC 2050 OVER VARNISH

DECOLAC 2050 OVER VARNISH is polyester based non-retortable, general purpose over varnish with no wet-on-wet properties. It gives excellent gloss on top off UV-curable i...

METALAK 1030 CLEAR LACQUER

METALAK 1030 CLEAR LACQUER is epoxy based external clear lacquer with good flexibility & good adhesion to direct tin plate. Suitable for general line cans and lids

METALAK EXTERNAL GOLD LACQUER 1030 0461

METALAK EXTERNAL GOLD LACQUER 1030 0461 is epoxy based External Gold Lacquer for General Line Cans and lids. This is not to be used for internal coating. It is characte...

DECOLAC THINNER 18886

DECOLAC THINNER 18886 is combination of solvents used to reduce the viscosity of Overprint Varnishes and White Can Coatings while printing. Easily compatible to our vari...

AQUASTAR 6620

Water reducible flexographic inks available as ready ink and for computerized dosing system suitable for printing on bleached and unbleached Kraft liners. Characteristic ...

AQUASTAR OR 6646

Waterbased ink with excellent fat/oil resistance especially formulated for food wrap glassine papers where the print does not come in direct contact with the food. The fa...

AQUAGLOSS PE-C 6645

Waterbased ink especially suitable for PE-coated board / paper with excellent water and wet rub resistance Characteristically these inks have excellent printability, lay ...

AQUALABEL 6650

Water reducible flexographic ink for Coated and Matt label stock to be printed using Narrow Web Machine. Characteristically these inks give brilliant glossy prints with s...

Imperial® AQUAFOIL 6635

Flexographic waterbased inks for printing on Aluminium Foil wrappers. Characteristic features include good adhesion with excellent rub resistance and good setting.

AQUAGLOSS HC 6652

Waterbased flexographic inks especially designed for printing on single side PE-Coated boards meant for Hotcups. Characteristic features are good printability and are fas...

AQUASTAR PE/PP 6610

Water reducible flexographic inks suitable for printing on Corona treated Extruded PE and PP films. These inks characteristically have excellent gloss, printability and s...

Imperial® AQUAFLEX PE 6033

Waterbased flexographic inks suitable for small paper sacks & gift wraps. Characteristic features are excellent water and rub resistance with good gloss on right subs...

AQUAGLOSS PP 6655

Water reducible flexographic ink for PP Coated label to be printed using Narrow Web Machine. Characteristic features include excellent gloss and adhesion on PP coated lab...

HYDROSACK 6670

Water reducible flexographic ink especially designed for printing on kraft paper bags for cement packing. Excellent printability and high strengths are key features.

AQUASTAR R 6615

Water reducible ruling inks especially designed for printing on forms, notebooks and other stationery. Characteristically these inks have high water resistance and so do ...

AQUAMETALLIC 6641

Water reducible flexographic metallic inks especially designed for printing on coated and uncoated label stock. These inks are given in two pack system and the components...

WATERBASE HIGHGLOSS OVERPRINT VARNISH 6221

Aqueous Acrylic High Gloss coating for In-line or off-line roller coating applications on coated papers and paper boards. Characteristic features are excellent gloss, goo...

WATERBASE HIGHGLOSS FAST DRYING OVERPRINT VARNISH 6225

Aqueous Acrylic Fast drying High Gloss coating for In-line or off-line roller coating applications on coated papers and paper boards. Characteristic features are fast dry...

WATERBASE OVERPRINT VARNISH 6200

Aqueous Acrylic Gloss coating for In-line or off-line roller coating applications on Folding Cartons, Coated papers and Commercial work. Characteristic features are good ...

WATERBASE OVERPRINT VARNISH 6201

Aqueous Acrylic Gloss coating for In-line or off-line roller coating applications on PE-coated boards. Specially formulated as a protective layer for inks on PE-coated bo...

WATERBASE OVERPRINT VARNISH 6202

Aqueous Acrylic Gloss coating for In-line or off-line Flexo applications on Kraft papers. Specially formulated as a protective layer for inks on Kraft paper and hence has...

WATERBASE GLOSS OVERPRINT VARNISH 6205

Aqueous Acrylic Gloss coating for In-line or off-line Flexo or Gravure applications on paper boards used for cigarette cartons. Characteristic feature includes high glos...

WATERBASE DUCT OVERPRINT VARNISH 6206

Fast drying Aqueous Acrylic Duct Gloss Coating for In-line applications on Folding Cartons, Coated papers and Commercial work. Characteristic features include good gloss ...

WATERBASE OVERPRINT VARNISH 6210

Economical Aqueous Acrylic Gloss coating for In-line or off-line roller coating applications on Folding Cartons, Coated papers and Commercial work. The varnish has good g...

WATERBASE FOIL OVERPRINT VARNISH 6211

Aqueous Acrylic Gloss coating for In-line or off-line Flexo or Gravure applications on Aluminium foils. Characteristic feature includes high gloss and excellent scuff a...

WATERBASE HIGHSLIP OVERPRINT VARNISH 6222

Aqueous Acrylic Gloss coating for In-line or off-line roller coating applications on Folding Cartons, Coated papers and Commercial work. Characteristic features are high ...

WATERBASE COBB RESISTANCE VARNISH 6808

Aqueous Acrylic Varnish with excellent Cobb resistance properties especially formulated for porous substrates such as corrugated kraft boards where the varnish prevents w...

WATERBSE DUCT MATT VARNISH 6216

Fast drying Aqueous Acrylic Duct Matt Coating for In-line applications on Folding Cartons, Coated papers and Commercial work. Characteristically has excellent water and r...

WATERBASE MATT VARNISH 6311

Aqueous Acrylic Fast drying Matt Coating for In-line and Off-line roller coat applications on Coated paper and Paper board. Characteristic features are Good mattness with...

AQUASTAR PEARLESCENT VARNISH 6800

Aqueous Acrylic Pearlescent based lacquer for In-line and off-line roller coat application on Coated paper and paper board. Characteristic features are good pearl finish ...

AQUASTAR BRILLIANT PEARL COATING 6812

Aqueous Acrylic Pearlescent based lacquer for In-line and off-line roller coat application on Coated paper and paper board. Characteristic features are brilliant pearl f...

WATERBASE DUCT PEARL VARNISH 6809

Aqueous Acrylic Duct Pearl varnish for In-line application on Coated paper and paper board. Characteristic features are good pearl finish with high gloss, slip, rub and w...

AQUASTAR PRIMER 576

Wax-free Aqueous Acrylic Primer for applications on Aluminium foils and metallised films and boards using flexo or gravure or roller coating method. Characteristic featur...

AQUASTAR PRIMER 6255

Acrylic based primer especially designed for metallised films and boards for flexo or gravure or roller coating application. Excellent anchorage and flexibility are chara...

WATERBASE SLIP PRIMER 6257

A waterbase primer with excellent slip properties of metallised film applications by flexo or gravure method. Key features are the excellent slip properties along with ex...

WATERBASE PRIMER 6248

Wax-free Aqueous Acrylic Primer for roller coat application on Paper and Paper Board as a protecting layer between the print and the UV varnish. This prevents the colour ...

WATERBASE FOIL PRIMER 6258

Wax-free Aqueous Acrylic Primer especially formulated for printing on blister foils. Characteristically the primer gives excellent anchorage and excellent adhesion for su...

WATERBASE PAPER PRIMER 6259

Wax-free Aqueous Acrylic Primer especially formulated for printing on Metallised paper. Characteristically the primer gives excellent anchorage and excellent adhesion for...

REFRESHER 2113 (pH ADJUSTER)

Waterbase inks upon long storage tend to go down on pH. Adding 0.5 to 1% of Refresher 2113 would restore the pH of inks to the desired level of 8.5-9.Excessive use of th...

DEFOAMER 9000 130189

Defoamer 189 is one with optimum active ingredients and hence can be added 2-3% in Waterbase inks without affecting its print quality at the same time it is very effectiv...

DEFOAMER 999 128408

Defoamer 408 is especially suitable of our AQUALINE PE-C inks and Waterbase Coatings. It is very effective at a dosage of upto 1% in eliminating foaming and also helps pr...

DEFOAMER 9000 127855

Defoamer 855 with high active ingredient content to be used for all types of Aqueous inks. At recommended dosages of upto 1% it is very effective in eliminating microfoam...

AQUALINE CLEANER 440

A concentrated general purpose cleaner for Waterbase flexo inks. It should be diluted at a ration of 1:10 with water before use. It is non-corrosive, non-flammable and d...

AQUALINE CLEANER 441

A ready to use general purpose cleaning solution for all types of Waterbase flexo inks. It can be used directly to clean all types of anilox rollers, plates, ink tanks, m...

RETARDER 999 131288

Retarder 288 can be used with all our Waterbase inks to slow down the drying rate. The dosage would have to be determined by the printer taking into consideration the pr...

WAX ADDITIVE 131285

Aqueous solution of Micronised Wax which when incorporated in dosages of 2-3% would improve the scuff resistance of the prints of Waterbase inks without affecting its glo...

WETTING ADDITIVE 128009

Specially formulated additive to improve the surface wetting and flexibility of our Waterbase overprint varnishes. A dosage 1-2% can be added under stirring.

ANTI-SLIME ADDITIVE 999 130362

For in-can long term preservation of Waterbase inks and varnishes especially in hot and humid conditions. At a dosage level of 0.1-0.2% Anti-slime additive 999 130362 has...

HIFLEX 709:

Modified NC based inks for Flexo or Gravure reverse application on treated BOPP and subsequent lamination to co-extruded polypropylene films, metallised co-extruded polyp...

HIFLEX CF 7035:

Catalyst free Modified NC based inks for Gravure reverse application on treated BOPP and subsequent lamination to co-extruded polypropylene films, metallised co-extruded ...

HIFLEX R 713

These are press ready ink version of Hiflex 709 where the printer can directly pour and print without adding any additive or solvent. The thinners have to be replenished ...

HIFLEX SURFACE 718

Modified NC based inks specially designed for Flexographic surface printing on treated clear / opacified co-extruded polypropylene films, treated LDPE film and on suitabl...

HIFLEX BOARD 7055

Modified NC based Flexo inks for cartons and boards. Characteristic features are High gloss and strength with excellent flexibility. Excellent scuff resistance and low so...

HIFLEX PAPER 7050

Modified NC system for Flexographic printing on envelopes & paper. Apart from High gloss and strength Hiflex Paper 7050 inks have good scuff resistance and excellent ...

FLEXSTAR 715

Modified NC system for surface printing by Flexo or Gravure on treated clear/opacified co-extruded polypropylene films, treated LDPE film and on suitably primed Metallise...

LAM-E-FLEX 7135

Modified NC based inks for Flexo or Gravure reverse application on treated BOPP and subsequent lamination to co-extruded polypropylene films, metallised co-extruded poly...

UROLAM 7080

Modified NC based inks for Gravure reverse application on treated BOPP and subsequent lamination to co-extruded polypropylene films, metallised co-extruded polypropylene ...

SURFACE CF 7045

Catalyst free Modified NC system for surface printing by Flexo or Gravure on treated clear/opacified co-extruded polypropylene films, treated LDPE film and on suitably pr...

Imperial LAMFLEX 7070

Highly concentrated modified NC base colours for in-house blending. Can be used for both surface and reverse jobs by adding suitable additives and printed by flexo or gra...

ImperialFLEX 7000

NC based ink Concentrates for dispense system and in-house blending to be converted into inks for both flexo and gravure jobs. Using various Technical varnishes the same ...

POLYSTAR 3301

Modified Polyamide system for Flexographic surface printing on treated LD / HDPE/ PP/ HM HDPE films. Characteristic properties include High Gloss, excellent adhesion and ...

POLYFIX 303

Modified Polyamide system for Flexographic surface printing on treated and untreated low and high density polyethylene films. The series is specially developed for untrea...

TWIST STAR 341

Modified Polyamide system suitable to print on PVC films for Twist Wrappers. The key features are low residual odour with excellent flexibility and scuff resistance. Goo...

HIFLEX HYBRID 8065

Toluene and Ketone Free Modified Polyurethane system specially designed for Gravure or Flexo printing on both Corona and Chemically treated Polyester films. These inks ar...

SHRINK STAR 753

Modified Propionate system formulated for surface or reverse gravure printing on PVC Sleeve and other substrates such as Polystyrene, PVdC coated clear / opacified polypr...

FLEXSTAR OVERPRINT VARNISH 126768

Gloss overprint varnish based on modified NC system specially formulated for treated clear/opacified co-extruded polypropylene films, treated low and high density polyet...

FLEXSTAR HIGH SLIP OVERPRINT VARNISH 128260

High Slip overprint varnish based on modified NC system specially formulated for treated clear/opacified co-extruded polypropylene films, treated low and high density pol...

FLEXSTAR HIGH GLOSS OVERPRINT VARNISH 128801

High Gloss overprint varnish based on modified NC system specially formulated for treated clear/opacified co-extruded polypropylene films, treated low and high density po...

FLEXSTAR HR OVERPRINT VARNISH 128639

Overprint varnish based on modified NC system specially formulated for treated clear/opacified co-extruded polypropylene films, treated low and high density polyethylene...

FLEXSTAR NON-SLIP OVERPRINT VARNISH 131308

Non-slip overprint varnish based on modified NC system specially formulated for treated clear/opacified co-extruded polypropylene films, treated low and high density pol...

FLEXSTAR VARNISH FOR GOLD POWDER 130709

Modified NC based varnish for making metallic gold inks for printing on treated clear / opacified co-extruded polypropylene films, treated low and high density polyethyle...

HIFLEX BOARD 7055 OVERPRINT VARNISH

Modified NC based Overprint Varnish for printing on boards and cartons. Characteristic properties include excellent gloss and flexibility with good slip and scuff resista...

HIFLEX BOARD 7055 PEARLESCENT VARNISH

Pearlescent base varnish in modified NC system for printing on boards and cartons. Characteristic properties include glossy pearlescent effects and excellent flexibility ...

HIFLEX PAPER 7050 OVERPRINT VARNISH

Modified NC system based Overprint Varnish for printing on paper and envelopes. Key features are High gloss, flexibility, slip and scuff resistance.

HIFLEX SURFACE 718 GLOSS OVERPRINT VARNISH

Hiflex Surface 718 Gloss overprint varnish is based on modified NC system for overprinting on treated clear / opacified co-extruded polypropylene films, treated low and h...

SHRINKSTAR 753 OVERPRINT VARNISH

Modified Propionate system based overprint varnish formulated for overprinting on various substrates such as Low plasticized PVC films, Unplasticized PVC Films, Polystyre...

SHRINKSTAR 753 MATT OVERPRINT VARNISH

Modified Propionate system based Matt overprint varnish formulated for over printing on various substrates such as Low plasticized PVC films, Unplasticized PVC Films, Pol...

SHRINKSTAR 753 PEARLESCENT VARNISH

Pearlescent based overprint varnish in Modified Propionate system specially formulated for various substrates such as Low plasticized PVC films, Unplasticized PVC Films, ...

POLYSTAR CSR LACQUER 3301 67660

Specially formulated modified polyamide system based protective barrier for Cold Seal Application on substrates such as treated clear/opacified co-extruded polypropylene ...

FLEXSTAR FOIL PRIMER 127363

Mixed resin primer for flexographic application on Aluminium foils. Characteristic features include good scuff resistance, high flexibility and excellent adhesion.

ADHESION PROMOTER 9000 5376

Complex chelates in Ethanol which is effective in resin systems where NC is the Principal film former. At small dosages of 3-4% it imparts improved adhesion to treated O...

ADHESION PROMOTER 9000 5377

Acetyl Acetonate free adhesion promoter used in systems where NC is the principal film forming resin as adhesion improving agent. At small dosages of 4-5% it imparts ...

WAX ADDITIVE 9000 2113

Micronised wax paste which can be used in conjunction with both our Flexo and Gravure inks to improve scuff resistance. The Wax additive 9000 2113 can easily be disperse...

WAX ADDITIVE 9000 2114

Micronised wax paste for high rub and scuff resistance which can be used in conjunction with both our Flexo and Gravure inks. The Wax additive 9000 2114 can easily be d...

THINNERS & RETARDERS

Thinners and Retarders are available for each of the above solvent based series. Thinners can be used for reducing the viscosity of the particular ink and Retarders are s...

Imperial®QUICK WASH 9050 99428

Used to clean the rollers when a conventional sheetfed offset inks are used. This wash will not damage the rollers.

Imperial® UV WASH 9050 30025

Used to clean the rollers and plates after printing without damaging it. Also used to clean the spare parts of machine and apparatus contaminated with UV inks.

Imperial® AUTO BLANKET WASH 9050 99435

This is a combination of low aromatic solvent special developed for cleaning of blankets without damaging it.

MIXED DRIER 205 M1944

Combination of driers used to accelerate the drying of conventional offset inks. Recommended dosage is 0.5 to 1%. Care has to be taken as excessive dosages will deteriora...

REFRESHER 2113

Waterbase inks upon long storage tend to go down on pH. Adding 0.5 to 1% of Refresher 2113 would restore the pH of inks to the desired level of 8.5-9. Excessive use of th...

Imperial® UV REDUCER 127569

Used to reduce the viscosity of the UV inks without reducing the strength. Recommended dosage is 0.5% to 1%.

Imperial® UV FLEXO REDUCER 128122

This reducer is specially developed to reduce the viscosity of UV Flexo inks without reducing the strength of the ink. Can be easily mixed in the ink.

TACK REDUCER 5323

Used to reduce the tack of conventional off set inks. This can be easily mixed in inks. Recommended dosage is 1 to 2%.

PRINTING INK OIL REDUCER

Distillate used to reduce the viscosity of conventional offset inks. This can be easily incorporated in ink. Recommend dosage is 1 to 2 %.

Imperial® WAX ADDITIVE 4130

Micronised wax paste which can be used to improve the scuff and slip properties of UV inks. This wax additive can be easily dispersed in UV inks by normal stirring and at...

Imperial® CURING ADDITIVE 4063

Combination of photo initiators specially used to increase the curing rate of UV White inks and light colour inks. This can be easily mixed in the inks at dosage level a...

Imperial® UV CURING ADDITIVE 4063

Combination of photo initiators specially used to increase the drying speed of dark coloured UV inks. This can be easily mixed in the inks at dosage level at 1 to 2%. Sp...

WAX ADDITIVE 797

Aqueous solution of Micronised Wax which when incorporated in dosages of 2-3% would improve the scuff resistance of the prints of Waterbase inks without affecting its glo...

WAX ADDITIVE 9000 2113

Micronised wax paste which can be used in conjunction with both our Flexo and Gravure inks to improve scuff resistance. The wax additive 9000 2113 can easily be dispersed...

WAX ADDITIVE 9000 2114

Micronised wax paste for high rub and scuff resistance which can be used in conjunction with both our Flexo and Gravure inks. The Wax additive 9000 2114 can easily be d...

WETTING ADDITIVE 128009

Specially formulated additive to improve the surface wetting and flexibility of our Waterbase overprint varnishes. A dosage 1-2% can be added under stirring.

ANTI-SLIME ADDITIVE 999 130362

For in-can long term preservation of Waterbase inks and varnishes specially in hot and humid conditions. At a dosage level of 0.1-0.2% Anti-slime additive 999 130362 has ...

ANTI STACKING ADDITIVE: 130326.

This additive improves the stacking properties of can coatings when mixed with our coatings with a dosage level of 3 to 5 %. This additive should be mixed under stirring.

BRIGHTNER ADDITIVE 0469

Optical Brightener used to reduce to yellowish tint of over print varnishes. This can be easily incorporated in varnishes by stirring. Recommend dosage is 0.02 to 0.03 %

LEVELING ADDITIVE 0431

Specially recommended in can coat to improve the surface defects of varnishes and white can coatings. It will eliminate defects like pin holing, fish eyes and de-wetting....

DEFOAMER 9000 130189

Defoamer 189 is one with optimum active ingredients and hence can be added 2-3% in Waterbase inks without affecting its print quality at the same time it is very effectiv...

DEFOAMER 999 128408

Defoamer 408 is especially suitable of our AQUALINE PE-C inks and waterbase Coatings. It is very effective at a dosage of upto 1% in eliminating foaming and also helps pr...

DEFOAMER 9000 127855

Defoamer 855 with high active ingredient content to be used for all types of Aqueous inks. At recommended dosages of upto 1% it is very effective in eliminating microfoam...

Imperial® UV DEFOAMER

Used to stabilize foaming of inks and varnishes. Recommended dosage is 0.1 to 0.2%.

AQUALINE CLEANER 440

A concentrated general purpose cleaner for Waterbase flexo inks. It should be diluted at a ration of 1:10 with water before use. It is non-corrosive, non-flammable and do...

AQUALINE CLEANER 441

A ready to use general purpose cleaning solution for all types of Waterbase flexo inks. It can be used directly to clean all types of anilox rollers, plates, ink tanks, m...

RETARDER 999 131288

Retarder 288 can be used with all our Waterbase inks to slow down the drying rate. The dosage would have to be determined by the printer taking into consideration the pre...

ADHESION PROMOTER 9000 5376

Complex chelates in Ethanol which is effective in resin systems where NC is the Principal film former. At small dosages of 3-4% it imparts improved adhesion to treated OP...

ADHESION PROMOTER 9000 5377

Acetyl Acetonate free adhesion promoter used in systems where NC is the principal film forming resin as adhesion improving agent. At small dosages of 4-5% it imparts exc...

DECOLAC THINNER 18886

DECOLAC THINNER 18886 is combination of solvents used to reduce the viscosity of Overprint Varnishes and White Can Coatings while printing. Easily compatible to our vari...

THINNERS AND RETARDERS FOR SOLVENT BASED INKS

Thinners and Retarders are available for each of our solvent based series inks. Thinners can be used for reducing the viscosity of the particular ink and Retarders are so...

Imperial® UV OFFSET REDUCER 888 127569

Imperial® UV Offset Reducer is suitable for UV inks only. 1-2% can be added in UV Offset inks to reduce the viscosity.

Imperial® UV FLEXO REDUCER 888 128122

Imperial® UV Flexo Reducer is suitable for UV inks only. It helps in reducing the viscosity of UV Flexo inks.

Imperial® UV WAX ADDITIVE 9000 4130

Imperial® UV Wax Additive is a thixotropic paste. It enhances the slip and mar resistance of UV inks.

Imperial® UV CURING ADDITIVE 9000 004064

Imperial® UV Curing Additive is recommended for UV coloured inks. It increases the curing speed of UV inks. Recommended dosage is 2-4%.

Imperial® UV DEFOAMER

Used to stabilize foaming of inks and varnishes. Recommended dosage is 0.1 to 0.2%.

Imperial® Printing Ink Oil Reducer 9000 5335

Imperial® Printing Ink Oil Reducer helps in reducing the viscosity of Sheetfed Offset inks without effecting the strength and density.

Imperial® Printing Ink Tack Reducer 9000 5323

Imperial® Printing Ink Tack Reducer is a thixotropic mineral oil paste. It helps in reducing the tack of Sheetfed Offset inks.

Imperial® UV Flexo Accelerator 9000 5560

Imperial® UV Flexo Accelerator is recommended for UV White ink. It increases the curing speed of UV inks. Recommended dosage is 2-4%.

Imperial® AUTO BLANKET WASH 9050 99435

Imperial® Auto Blanket Wash is a mixture of aliphatic solvents suitable for cleaning Sheetfed Offset machine blankets.